A Guide to the Furnace Installation Process

November 8, 2022

A furnace plays an integral role in controlling the temperature in your home, especially during winter. As the name suggests, a furnace is responsible for warming up your home, and it’s considered to be one of the most durable HVAC parts. On average, furnaces can last for more than 15 years, and some are more energy efficient than others. 

However, there might come a time when you will have to replace even the most durable parts. Some technicians will recommend changing the whole system, which can be quite expensive, and they will get asses whether just changing the furnace is viable.

In general, installing a furnace on your own should be avoided. Even though it might be cheaper, an experienced technician will ensure that everything is connected and functioning as it should be.

Still, if you do decide to install the HVAC system by yourself, there are a few steps that must be obeyed. Below we compiled a step-by-step guide that will prepare you for your furnace installation process.

The installation process with professionals

If you decide to install a furnace with the help of professionals, your tasks will be minimal as they will ensure that everything runs like clockwork. However, it’s worth mentioning what exactly the technicians will do and where to look for them.

Work with local experts

The first step of furnace installation is to find the right experts. This will depend on your area and whether you can find expert technicians nearby. You can ask around for opinions on the best HVAC technician in the area or take to the internet to read reviews of satisfied and unsatisfied customers.

In addition to that, it’s much more likely to get a better price if you work with local technicians. For instance, if you live in one of Ontario’s largest urban areas, St Catharines, look for furnace installation St Catharines-based specialists to ensure that you get a fair price and a solid installation.

The process of installation

HVAC experts know what they are doing, and any problem that occurs during the process of furnace installation will be resolved by the experts. In addition to that, they will ensure that your whole house is cleaned when they finish working.

The first step the technician will take is asses the surroundings and find the right place to install the furnace. If you are just replacing your furnace, the technician will operate in the same area, of course, if the whole system doesn’t need to be replaced.

Going on after positioning the furnace correctly, they will connect it to your home ducting system. The next step is connecting the vent pipes and the gas supply. In the last few stages, the technicians will connect the unit to an electric supply and verify that all the wiring is in order.

Lastly, the technician will turn the system on and see whether it is producing favorable results.

Solo furnace installation process 

If you are a person that loves a bit of handy work, turn off the main unit to ensure safety and prepare your toolbox. After that, thoroughly read through the manual and plan all your subsequent steps.

You will have to be extremely careful and prepare for the following steps:

  • Positioning the furnace properly;
  • Connect it to the ducting work;
  • Check for proper venting;
  • Test the performance of your newly installed part.

To dive a little bit in depth, you will first have to make sure to place the furnace either in the basement or in the attic on solid ground. Before starting the installation process, shut off the entire electrical supply leading to your system. Then, you will have to take care of the eclectic installation part by connecting all the unit’s color-coded wires. However, don’t overload your circuit breaker with too many appliances.

The next step is gas line installation. You will have to calculate your needs well before installing a gas supply line that can supply around 7 million BTUs per hour. The best equipment for this is stainless steel gas line.

Lastly, drain the unit completely by opening its intake damper. Wait for it to drain, connect the unit to a power supply and check whether everything is functioning correctly.

Final thoughts

Installing a furnace can be a very complex part if you don’t have the right expertise and tools. However, with the help of a local professional technician, you can rest assured that your indoor temperatures will be properly controlled. 

After the installation of your furnace, don’t forget to regularly check up on and maintain your whole system so it can work properly for years to come.


You may also like

Non-GamStop Casinos in the UK
{"email":"Email address invalid","url":"Website address invalid","required":"Required field missing"}